Karting RSS

The karting world is constantly changing, and now with the information super highway flowing at full speed, karting knowledge has grown and is now spreading like wildfire.

In a recent YouTube video, we took you through the steps to fitting your own go kart seat. There are many ways to fit a seat to a go kart, however, after years of putting each method to the test, we have found this procedure to be the easiest and most efficient, leaving you with plenty of time to concentrate on your race preparation. Below we take you through the steps in a little more detail: Tools Required for this process are: Battery drill Tape measure Bullet point marker pen (e.g Sharpie) 2 x 5mm Allen keys (1 T-Bar and...

  This post takes you through the steps to change the front sprocket of your Rotax Max 125 engine and how to remove and re-install your clutch drum. Once you notice that your front sprocket is worn, it's a good idea to change your front and rear sprocket and chain at the same time, as they will usually wear at the same rate. Tools required for this job are: Torque wrench able to do 110Nm (optional)Breaker bar16mm or 17mm ring spanner5mm allen key38mm impact socket17mm impact socket (optional)5mm in-hex socket (optional)Rotax sprocket holder & locking tool for ring gear  ...

We recently posted a video to the Power Republic YouTube Channel showing you how to service your Dellorto VHSB 34 carburettor for a Rotax Max 125 go-kart engine. Here we will break down the steps in a little more detail for you, as well as providing images and links to purchase the parts. Ok, so let's get into it. Please remember leave any comments or questions below. The tools you'll need for this job are: 4mm Allen Key1/4" Drive Ratchet Handle9mm SocketFlat Blade Screwdrivers - Various sizesPointy-Nose PliersSide-Cutters12mm Ring Spanner Digital VerniersCarburettor Cleaner  CAUTION: Always remember to wear safety glasses when using solvents, particularly if...